Lambda sensor. Wiring harness may be shorter that your existing connector on some modeels, and will therefore need extending.

 This part is available by special order, request a quote

 32727010 GU32727010 32 72 70 10
 3272 7010 3272.7010 32.72.70.10

Side stand Ignition Cutout Switch

 Sorry, this part is no longer available.

 03759100 GU03759100 03 75 91 00
 0375 9100 0375.9100 03.75.91.00

Reconditioned Valeo starter motor and solenoid in black and silver finish. Professionally reconditioned and sold with a 12 month guarantee. This is a suitable replacement for Bosch 8 or 9 tooth Guzzi starter motors. Minor modification may be required on some pre 1990 models to make room for the solenoid. Please note that this item may be fitted to Loop frame models with some modifications as described in Guzziology. See , see this link for the modifications required to fit a Valeo starter to a 4 speed model.

This is an exchange only item, we can supply these before receiving your exchange unit subject to a refundable deposit so you can keep your bike on the road. See ELC10737 for the refundable deposit. Send your old starter motor to our registered address. NB In case of starter motor problems do not tap the casing as this will certainly cause it to fail. See SSA08075 for mounting bolts. Also known as Guzzi ref. 30730710
Do not remove second nut from terminal posts when fitting - this nut is required to hold the terminal in place

Supercedes Guzzi refs. 12730705, 14730554 and 14730705

 30730711 GU30730711 30 73 07 11
 3073 0711 3073.0711 30.73.07.11

Complete fuel pump assembly including mounting plate, gasket and fuel filter

Also known as Guzzi ref. 978826 88724

 This part is available by special order, request a quote

 03107270 GU03107270 03 10 72 70
 0310 7270 0310.7270 03.10.72.70

Neutral indicator switch

 Availability varies on this part, check availability

 12207200 GU12207200 12 20 72 00
 1220 7200 1220.7200 12.20.72.00

NGK PMR8B laser platinum spark plug used for the second plug on dual plugged 2 valve models and main spark plug on 4 valve models

Guzzi also refers to this as a PNR8B plug. Use tool TOA05931

 This part is due back in stock soon, call 01484 841395 to reserve yours

 05717030 GU05717030 05 71 70 30
 0571 7030 0571.7030 05.71.70.30

Brakelight switch for rear brake pedal

 This part is due back in stock soon, call 01484 841395 to reserve yours

AP8112996

Also fits Aprilia, CAPONORD 1000 ETV 1000, Aprilia, PEGASO 650, Aprilia, RS 250. Aprilia, RST FUTURA, Aprilia, RSV 2 1000, Aprilia, RSV 4 1000 RSV4 1000RR, Aprilia, SHIVER 750, Aprilia SHIVER 750 SHIVER 750, Aprilia TUONO 1100 RR RSV 1100 TUONO V4

Brand new genuine Valeo starter motor and solenoid suitable as a direct replacement for Guzzi Valeo and Bosch 8 or 9 teeth starter motors. You may need to fit hex headed neutral switch bolts on some pre 1990 models to make room for the solenoid. Our part number for the bolt is SSA06016
Please note that this item may be fitted to Loop frame models with some modifications as described in Guzziology, also see https://www.thisoldtractor.com/moto_guzzi_loopframe_starter_-_how_to_replace_the_magneti_marelli_starter_with_a_valeo.html for advice on this upgrade.

This is a genuine Valeo starter made in the EU- please do not confuse with the cheap Chinese copies that sometimes appear on eBay.

Supercedes Guzzi refs. 12730705, 14730554 and 14730705

Please note you can get a discount of £30 on this item if you part exchange your existing faulty starter motor. See ELA30837 for less expensive alternative part

 This part is due back in stock soon, call 01484 841395 to reserve yours

 30730711 GU30730711 30 73 07 11
 3073 0711 3073.0711 30.73.07.11

Support for oil temperature sensor

 This part is available by special order, request a quote

 03163330 GU03163330 03 16 33 30
 0316 3330 0316.3330 03.16.33.30

Sidestand cutout switch

See ELA81319 for rotary switch that was fitted to some models

 This part is available by special order, request a quote

 639542 MG639542